|
|
 |
1. Plastisize and complex admixture:
|
Superplastisizer S-3
Development of Russian experts of NIIZHB. Is analogue of foreign supersofteners of type "MAITY 100 " (Japan), SIKAMENT, MELMENT (Germany), not conceding it on quality but more cheaper.
Price - 1050 $USD/tn.
|
|
Megalit C-3 ML
The admixture "Megalit C-3 ML" - one of a complex plastisize additives of a series "Megalit", analogue of Superplastisizer C-3.
Price - 900 $USD/tn.
|
|
Megalit C-3 RV
The admixture " Megalit C-3 RV " - one of a complex plastisize additives of a series "Megalit", and represents plastisize additive (on the basis of C-3) with air entrainment effect.
Price - 900 $USD/tn.
|
|
Megalit C-3 PM
Megalit C-3 PM provides an opportunity of manufacture of concrete works on a frost without heating of materials and the subsequent heating of the laid concrete is based that at introduction in structure of a concrete mix Megalit C-3 PM at negative temperatures the liquid phase is kept. Owing to it minerals portlandcement can hydrogenate itself, providing with that hardening concrete on a frost.
Price - 900 $USD/tn.
|
|
Megalit C-3 VO
The new additive "Megalit C-3 VO" is technological and confidently works in the same dosages to weight of cement, as standard Superplastisizer C-3 (from 0,35 % up to 0,70 %), but thus effectively reduces the maintenance of air (on 1 %) at low water-cement attitudes and essentially raises durability of concrete.
Price - 900 $USD/tn.
|
|
Relamix
New perspective development of the Russian and Ukrainian scientists. Relamix condenses structure of concrete and provides increase of its frost resistance and water resistance, does not render corrosive attack to armature.
Mass consumption 0,35-0,7 % of cement weight.
Price - 1 150 $USD/tn.
|
|
Defomix
Superplastisizer Defomix - a product on naphthalene formaldehyde a basis an antifoamer containing in the structure. The product is certificated by Gosstroy of Russia - the certificate of conformity
Mass consumption 0,5-1 % of cement weight.
Price - 1 150 $USD/tn. |
|
Multifunctional modifier PFM-NLK
The multifunctional modifier of concrete represents the complex admixture on the basis of plastisize and Air entrainment components. PFM-NLK it is applied to reception of concrete of high frost resistance from mobile concrete mixes. Allows to increase frost resistance of concrete considerably. At optimum selection of a dosage it is possible to receive from 350 up to 600 cycles of freezing (depending on applied materials).
Mass consumption 0,35-0,1 % of cement weight.
Price - 1 150 $USD/tn.
|
|
2.Hardening accelerators:
|
Megalith C-3 PT
Admixture “Megalith C-3 PT” is one of the plasticizers of the “Megalith” series (ТU 5730-003-43184789-2005) having water-reducing and hardness-control properties (accelerator).
Mass consumption from 0.4% to 1.0% of cement weight.
Price - 900 $USD/tn.
|
|
Plastil-U
The complex additive combining behaviour of plastisizer and the hardening accelerator of concrete.
Mass consumption 1,5 % of cement weight.
Price - 630 $USD/tn.
|
|
Relamix
New perspective development of the Russian and Ukrainian scientists. Relamix condenses structure of concrete and provides increase of its frost resistance and water resistance, does not render corrosive attack to armature.
Mass consumption 0,35-0,7 % of cement weight.
Price - 1 150 $USD/tn.
|
|
3. Inhibitors of concrete hardening:
|
Multifunctional modifier PFM-NLK
The multifunctional modifier of concrete represents the complex admixture on the basis of plastisize and Air entrainment components. PFM-NLK it is applied to reception of concrete of high frost resistance from mobile concrete mixes. Allows to increase frost resistance of concrete considerably. At optimum selection of a dosage it is possible to receive from 350 up to 600 cycles of freezing (depending on applied materials).
Mass consumption 0,35-0,1 % of cement weight.
Price - 1 150 $USD/tn.
|
|
4. Air entrainment admixtures:
|
Megalit C-3 RV
The admixture " Megalit C-3 RV " - one of a complex plastisize additives of a series "Megalit", and represents plastisize additive (on the basis of C-3) with air entrainment effect.
Price - 900 $USD/tn. |
|
Tar SDO-L
Application of liquid additive SDO-L will allow the enterprises: to provide (on 5-7 %) economy of cement; to lower on 100 kg/?3 density of concrete; to improve placeability a concrete mix and to reduce duration of formation of products; to improve Termo-and Sound-isolation properties of concrete; to raise frost resistance of concrete products, to improve appearance. Mass consumption-60 гр. Pitches on 100 kg of cement.
Mass consumption 0,06-0,1 % of cement weight.
Price - 1050 $USD/tn.
|
|
Tar
Application Tar SNV solves problems of reception of concrete of high frost resistance for designs inhabited and office buildings, hydraulic engineering, transport and industrial constructions.
Mass consumption 0,01-0,1 % of cement weight.
Price - 3500 $USD/tn.
|
|
5. Antifoam admixtures:
|
Megalit C-3 VO
The new additive " Megalit C-3 VO " is technological and confidently works in the same dosages to weight of cement, as standard Superplastisizer C-3 (from 0,35 % up to 0,70 %), but thus effectively reduces the maintenance of air (on 1 %) at low water-cement attitudes and essentially raises durability of concrete.
Price - 900 $USD/tn. |
|
Defomix
Superplastisizer Defomix - a product on naphthalene formaldehyde a basis an antifoamer containing in the structure. The product is certificated by Gosstroy of Russia - the certificate of conformity
Mass consumption 0,5-1 % of cement weight.
Price - 1 150 $USD/tn.
|
|
6. Antifreeze admixtures:
|
Megalit C-3 PM
Megalit C-3 PM provides an opportunity of manufacture of concrete works on a frost without heating of materials and the subsequent heating of the laid concrete is based that at introduction in structure of a concrete mix Megalit C-3 PM at negative temperatures the liquid phase is kept. Owing to it minerals portlandcement can hydrogenate itself, providing with that hardening concrete on a frost.
Price - 900 $USD/tn.
|
|
Противоморозная
добавка "Формиат Натрия"
Формиат натрия технический представляет
собой формиат натрия с незначительной примесью пентаэритрита
и его производных. Формиат натрия технический используется
в качестве противоморозной и пластифицирующей добавки
в производстве строительных конструкций, в кожевенной
промышленности как агент в преддубильных операциях,
как сырье в производстве муравьиной кислоты. |
|
7. Waterproofing agent:
|
Гидрофобизатор
"СОФЭКСИЛ-40"
Придает материалу
водоотталкивающие свойства, длительно сохраняющиеся
во времени, защищает строительные сооружения от воздействий
окружающей среды, предотвращает высолы, придает материалу
морозо- и коррозионную стойкость, светопрочность, препятствует
загрязнению поверхности и не изменяет внешнего вида
материала, его газо- и воздухопроницаемость.
|
|
|
|
|
|
